MASTERFLEX – Technische Schläuche & Verbindungen


Do you have general questions about the organisation, our locations or would you like to make a specific inquiry about the Masterflex Group? Or are you looking for a special contact person for a specific department? We have some suggestions for you to choose from.

MASTERFLEX – Technische Schläuche & Verbindungen

Choose Language

Please choose your language.

MASTERFLEX – Technische Schläuche & Verbindungen
MASTERFLEX – Technische Schläuche & Verbindungen
Our Brands
Application Areas

Competence in medical technology

Novoplast Schlauchtechnik & Fleima-Plastic: Our experts in medical technology

Meet us at MedtecLIVE with T4M 2022 in Stuttgart!

Plastic components for medical technology

Plastics have always inspired medical technology. As versatile as the material plastic itself - as diverse and individual can be products made of it.

We develop and manufacture high-quality tubes, connectors and applications as well as customer-specific assemblies for demanding applications in medical technology. Our components are used in the areas of infusion, dialysis, endoscopy, enteral nutrition, but also, for example, in hearing aids. For many years, we have successfully combined the two manufacturing technologies of extrusion and injection molding in demanding medical technology projects and thus offer creative solutions from a single source. 

More and more often, we are also development partners and accompany medical products from the idea to the finished product.

In Halberstadt, polymer materials are processed into medical tubing by extrusion in ISO Class 6 to 8 cleanrooms, in Wald-Michelbach, matching connection parts such as clamps, adapters, connectors or protective caps are manufactured by injection molding. On request, we assemble the individual components into customer-specific and precisely fitting assemblies - for example by bonding (with solvent adhesives or UV adhesives) or by ultrasonic welding.

We offer a wide range of cleanroom solutions for medical tubing.

We offer all assembly steps in the clean room according to ISO 14644-1 ISO Class 7 in accordance with the cleanliness and quality requirements of the respective product. As far as materials, manufacturing techniques and industry requirements are concerned, we can draw on a broad and deep know-how. Our products are "made in Germany". In addition to the legal framework conditions according to DIN EN ISO 13485:2016, we also meet the requirements of the EU Medical Device Regulation (MDR).

We are at MedtecLIVE with T4M! 

Meet our experts from the fields of extrusion, injection moulding and assembly - from 3 to 5 May at MedtecLIVE with T4M in Stuttgart.

We look forward to seeing you!

Make an appointment

Our solutions for medical technology

At a glance: Detailed information on Novoplast Schlauchtechnik and Fleima-Plastic, material and manufacturing competencies, as well as development processes and cleanroom capabilities.


Application examples for medical hoses and components

Filigree tubes for a tumor marker

In cooperation with a Berlin-based company that produces high-quality disposable medical instruments for diagnostics and therapy, we have realized a tumor marker with very good ultrasound and X-ray visibility.

For this, tubing sections made of soft low-density polyethylene (LDPE) from Novoplast Schlauchtechnik were assembled with 2-component injection-molded parts from Fleima-Plastic in the clean room to create the perfect end product.

Determine the right amount of oxygen

At Novoplast Schlauchtechnik, 3-layer multilayer hoses are produced that are used in the respiratory gas analysis line of artificially ventilated patients. This is used to measure CO2 concentration and partial pressure in the bypass method. Both are the basis for the enrichment of the supplied breathing air with anaesthetics or oxygen. At Fleima-Plastic the matching connectors are manufactured. Both parts are matched to each other in such a way that no leaks occur that could lead to incorrect measured values.

Detect corona foci by contrast medium

For the detection of corona foci in the human lung, a magnetic resonance examination is also frequently performed. The visibility of the inflammation is already good with this method without additional contrast injection. However, many doctors now also perform a contrast medium injection by high pressure. As a rule, quite hard, pressure-insensitive monolayer as well as co-extruded tubes from Novoplast Schlauchtechnik are used here - together with pressure-resistant connectors from Fleima-Plastic.

Company profiles - Novoplast Schlauchtechnik and Fleima-Plastic

Novoplast Schlauchtechnik, the specialist for the production of filigree plastic hoses as well as profiles

Our know-how in the field of extrusion

Our know-how in the field of extrusion is tailored to the needs of medical technology manufacturers. Extruded plastics are often the solution in medical technology when it comes to optimal  flexibility, hygiene and creation of prototypes. 

For medical technology, we offer both microextrusion for tubing with a diameter of less than 2 mm and coextrusion for the insertion of functional strips in the tubing wall.

Medical tubes

In the field of medical tubing, we offer a variety of products that we customize to meet your specific needs:


Fleima-Plastic, the specialist for the production of high-quality injection moulds and components

Our know-how in injection moulding and mould making

Injection moulding production at Fleima-Plastic takes place under controlled process conditions. We have 22 injection molding machines and our own mold and die shop. We can quickly and efficiently create the designed tools and molds and test the first injection molding samples within a very short time. Our mold shop is staffed by highly experienced as well as top level trained tool mechanics and mold makers.

Medical standard injection moulding components

In the field of standard medical components, we already offer an enormous variety of products. We will be happy to help you find the right connectors, clamps, caps or adapters for your applications based on your requirements, such as tubing diameter or material.

You can get an overview of our standard components here.

Learn more about our medical technology experts:

 Novoplast Schlauchtechnik  Fleima-Plastic

Please feel free to make an appointment with us at the fair!

We are the specialists for medical tubing and injection moulding components - and look forward to talking to you!

We are happy to advise you on individual solutions, specific development projects or special areas of application. Just send us a short message - we will get back to you immediately!